Ghost 2 Immobiliser Reviews
The ghost 2 immobiliser is a cutting-edge anti-theft system that uses advanced technology to stop car theft. This discreet device is undetectable by thieves and will only start your engine when an app or PIN code is entered.
It is weatherproof and connects to the CAN data network of your vehicle. It has a service/valet function that allows you to temporarily start your car when it is in garage.
Easy to install
The Ghost immobiliser protects your car from key theft, cloning and hacking. It utilizes an exclusive PIN code system integrated with the ECU of your vehicle, making it difficult for thieves to detect or alter. It's not visible and does not use sensors or special keys. It's also less expensive than replacing an ECU, or installing a key fob. You can even reduce your insurance premiums.
When installing cost of ghost immobiliser , be sure to follow the manufacturer's directions carefully. This will ensure the device works correctly and effectively. After the installation is complete check the system by entering the PIN code, then turning on the engine. Regular testing will allow you to spot any issues early on.
Before starting the installation, make sure you check the location of the CAN H and CAN L wires. These are crucial to powering the immobiliser, therefore it is crucial to ensure that they are connected correctly. Labeling the wires will help you locate them when installing. Once you have located the wires, connect them to a 12V power source and a grounding source. Use a fuse tap to shield the connections against short-circuits or damage.
After connecting the wires, neaten up the wiring with cable ties to stop interference. It is also recommended to cover the wires with insulation tape or heat shrink tubing. This will shield the device from electrical shorts, and extend its lifespan. Once the wiring is secured, it's a good idea test the Ghost 2 immobiliser.
The Ghost 2 immobiliser offers a service mode in situations where you might need to surrender your vehicle, such as when it is being serviced or valet-parked. This will disable the PIN sequence temporarily. To activate this feature, press the brake pedal while holding down the accelerator for a number of times that is equal to the first digit of the emergency code. The system will then enter service mode. This can be confirmed by flashing five times the indicator signal.
It is simple to change PIN codes
It is simple to safeguard your vehicle from theft with the ghost 2 immobiliser. It is concealed within the vehicle and is able to be accessed by a unique code. The device connects directly to the vehicle ECU via its data bus, and does not use radio frequency signals, as do traditional Thatcham immobilisers or other aftermarket alarm systems. This makes it difficult for thieves to listen for the click of an immobiliser relay or add new key fobs. The control unit is concealed within the wiring of the vehicle's dashboard, and isn't physically tampered to reset the system.
The ghost 2 immobiliser connects to the vehicle's CAN Data network. It uses buttons on the steering, door panels and centre console, to create a customisable series of up to twenty button presses that must be entered to start the engine, just as a PIN. This innovative next-generation system does not require any cutting of wires when it is installed and can be reprogrammed at anytime. You can also put your vehicle in Service or Valet mode to allow it to be started temporarily while you are giving it to a mechanic for work.
You can also make use of the app to alter your PIN code, or deactivate it completely if lost your keys. This feature is especially helpful in the event that you have offered your vehicle to someone else for valet parking or servicing since it prevents them from starting your vehicle and driving it away without consent. It's also unnoticeable to professional thieves since it does not make use of radio frequencies or circuit cuts.
Another benefit of the ghost 2 immobiliser is its ability to prevent thefts of relays. Relay theft is a common method of car theft where thieves attack the diagnostic port of your car and alter the signal transmitted by the key to the vehicle's ECU to trick it into believing that a valid key is present. The immobiliser of the traditional model can be manipulated in this manner, however with the ghost 2 immobiliser the signal is blocked by the immobiliser before it reaches the ECU.
Easy to use app
Ghost 2 is a revolutionary immobiliser that protects your car from key-cloning, hacking and key theft. It connects to your vehicle's CAN data network and requiring you to enter a PIN code before it can start the engine. It also deters thieves from using signal spoofing and device spoofing, which are common methods used to steal vehicles.
The system is easy to use and works just like a standard car alarm. After installing it, you can create an individual PIN code sequence that is up to 20 characters long and must be entered before the vehicle is started. This will stop the vehicle being taken away, even if you lose your keys. If you wish to disable the system you can do this by using an app on your smartphone.
The ghost is completely silent, and it does emit radio frequency signals. It is a discrete weatherproof device that can be mounted anywhere inside your car. It can be concealed under the dashboard, steering wheel or door panels. It communicates through the CAN data loop with your ECU and is not affected at all by the diagnostic tools used by thieves to find security systems. It is not affected by jamming devices which spoof codes.
It is a hidden system that can be used to prevent theft from all vehicles. The technology has been proven to be effective and complies with TASSA standards. The ghost is a fantastic solution for classic, sports and high-end cars, and it can also be used to secure vehicles that are let out on websites like Turo.
The Autowatch Ghost 2 represents the next generation of vehicle immobilisers. The system is inaccessible to thieves and stops them starting your vehicle without your PIN or until they are authorized by the app. It does not emit radio frequencies, or any other signals scanners could detect. Installation is fast and simple. The app is easy to navigate and has a user-friendly interface that makes it simple to set up and use. It also has a GPS tracker that can assist police find the vehicle and locate it.
Simple to reset
It is possible to protect your vehicle from theft using an immobiliser that is ghost 2. It integrates with your vehicle's ECU to create a barrier that thieves can't breach without the correct PIN. It's also TASSA-certified which means it is acknowledged by insurance companies. It's a useful device to stop car theft and will save you money in the end.
The Ghost system unlike traditional alarms or immobilisers, which require cutting of circuits, is directly connected to your vehicle's CAN data network. It works by pressing the buttons on your dashboard and steering wheel. You can create a unique pin that can be up to 20 presses long. The PIN has to be entered before your engine can begin as it would be a credit card. Ghost is inaccessible to thieves and has no LED indicators to signal its presence and makes it the most effective aftermarket CAN bus immobiliser that is on the market today.
Another benefit of the Ghost system is that it doesn't utilize radio frequency signals, which means it cannot be scannable or intercepted by thieves. This can prevent the cloning of keys and relay attacks, as well as the more common method of hacking into a car's CAN bus system, by scanning for signals from the alarm or immobiliser. In addition to that, the Ghost system is designed to be completely hidden in your vehicle. There aren't any lights or signals to indicate its presence.
The system also has the option of a Transport Mode that disables the Ghost system, which is useful for situations when you need to temporarily deactivate it, such as during transportation or servicing. However this mode isn't as efficient as Service Mode, as it does not disable the system if your vehicle goes over 31 mph for fifteen minutes.
You will need the emergency code from your installer to reset your Ghost 2 immobiliser. The code is typically hidden in the scratch-off section of the card that came with the installation. You should keep the emergency code secure and keep it in a location that is secure, like your wallet at home.